WAVE Remote Power Systems can be used for all types of applications such as:
Monitoring, Lighting, Security, Utility, SCADA, Traffic Controls, Emergency Power, Oil & Gas, and many more!
Data Sheet
Solar Module:
- Qty: 2 - 90 Watt – STC (Standard Test Conditions) Crystalline
- 12 Volt - Nominal System Voltage
Mount:
- Dual Side of Pole Mount, 2-Module
- Adjustable
- 2” U-Bolts - Designed to be installed on a 2” or 4” Schedule 40 pole (pole not provided)
Battery Enclosure:
- Mill Finish Aluminum - 29”x16”x9.5”
- NEMA 3R Vented
- Holds 2 each Group 30 Battery
- 2” Pole Clamps
- ¼ Turn Door Latches (1 Lockable)
- 12.5” Wide Component Mounting Channels for 1” to 8” Pole Clamps
- Removable Shelf for Second Battery or Equipment
- Two ½” Conduit Holes at Bottom
Battery:
- Qty: 2 - Valve-Regulated 100Ah, 12V, Group 30 Battery
- Rated 1,000 Cycles @ 50% DOD
- 12.93”x6.75”x9.76”
- 69 lbs. each
Controller Assembly:
- 20 Amp - 24 Volt w/ LVD (Low Volt Disconnect)
- ETL Listed to UL 1741 and CSA C22.2 No. 107.1-01
- Advanced PWM Charging
- Designed for Harsh Environments (Temp. Rating of -40 C to +60 C)
- Circuit Breakers on Array, Battery, and Load Lines
- Terminal Blocks for Array and Load Connects
- Prewired and Integrated into Enclosure
Output Cable:
- 15’ with Male & Female MC4 Connectors
- ½” 2-hole connector
Options (Additional Charges may Apply):
- High Wind Rated Mounting
- Stainless Steel Hardware
- 4”-8” U-bolts
- White Powder Coating
- 48VDC Output via DC to DC Converter
- Power over Ethernet (PoE)
- Lighting Controls
- Remote Monitoring & Control
- Meters
- 120VAC Output (Larger Enclosure Required)
- Radio Shelf or Space for Load Equipment (Larger Enclosure Required)
Calculate Load