Home > Controllers > Blue Sky Energy >

Blue Sky Energy SB1524iX Solar Boost 20A/15A 12/24VDC MPPT Charge Controller
Blue Sky Energy SB1524iX Solar Boost 20A/15A 12/24VDC MPPT Charge Controller
 


Product Code: SB1524IX
 

Description Document(s)
 

Blue Sky Energy SB1524iX Solar Boost 20A/15A 12/24VDC MPPT Charge Controller

Manufacturer Part#: SB1524iX

Flexible, reliable, and ready to work! The SB1524iX, featuring our patented MPPT technology, with a second battery output and IPN connector for remote display, is ideal for RVs and Marine applications. The SB1524iX can manage a 20A at 12V (or 15A at 24V) load output for small off-grid electrification applications. When programmed with an IPN ProRemote or UCM, it is also ideal for PV street lighting with its dusk-to-dawn load control. It can also charge Lithium batteries when programmed with the IPN Pro Remote. Its IPN Network interface can communicate with other Blue Sky Energy charge controllers as a single charging system, allowing increased flexibility and optimization in system design.

Features:

  • 97% Peak Efficiency
  • MPPT Technology
  • Multi-stage charging battery
  • LED indicators
  • PV array overload protection
  • Reverse battery and panel protection
  • Load output or second battery charge
  • IPN for network and remote display
  • Lithium compatible
Specifications

Full data sheet can be found in the Document(s) tab above.

Specifications
Output Current Rating 20 amp maximum (12V battery & 12V PV’s)
15 amp maximum (battery or PV’s > 12V nominal)
Nominal Battery Voltage 12 / 24VDC
PV Input Voltage 57VDC maximum (Recommend Maximum Voc at STC ≤ 45.6VDC)
Power Consumption 0.20W typical standby
Plus 0.40W each for charge ON & Load ON
Charge Algorithm 3-stage Bulk/Acceptance/Float
Plus automatic Equalize
Acceptance Voltage 14.2VDC fixed (range 10.0 – 40.0VDC)
Float Voltage 13.2VDC fixed (range 10.0 – 40.0VDC)
Equalization Voltage 15.2VDC fixed (range 10.0 – 40.0VDC)
Voltage Setpoint Limit 15.5VDC fixed (range 10.0 – 40.0VDC)
Temperature Compensation Optional sensor adjusts charge voltage based on battery temperature –5.00 mV/°C/cell correction factor (Range 0.00 to –8.00 mV/°C/cellk)
Sensor range –60 to +80°C
Power Conversion Efficiency 97% Typical @ 28 Volt 12 Amp Output
Physical Configuration and Dimensions Open frame construction with conformal coated electronics mounted to rear of 5.3” x 5.3” (13.5cm x 13.5cm) clear anodized aluminum face plate. Mounts into standard 411/16” (11.9cm) square electrical box which is included
Volt/Amp Accuracy/Range Battery voltmeters 40.0VDC±0.50% FS
Voltmeter 60.0VDC±0.50% FS Ammeters 25.0A±0.50% FS
Communication Blue Sky Energy’s proprietary IPN Network interface
Environmental -40 to +50°C, 10 – 90% RH non-condensing

Share your knowledge of this product. Be the first to write a review »