Home > Manufacturers > Victron Energy >

Victron Energy QUA483021100 Quattro 3kVA 48VDC 120VAC Inverter/Charger

Victron Energy QUA483021100 Quattro 3kVA 48VDC 120VAC Inverter/Charger
 
Need technical support?
Our Price: $1,715.30


Product Code: QUA483021100
Qty:

Description Document(s) Extended Information
 

Victron Energy QUA483021100 Quattro 3kVA 48VDC 120VAC Inverter/Charger

Manufacturer Part#: QUA483021100

Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally, it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

  • Two AC Inputs & two AC Outputs - The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
  • Unique PowerAssist feature - The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
  • Virtually unlimited power thanks to parallel operation - Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
  • Remote Monitoring and Control - When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more…
Specifications

Full data sheet can be found in the Document(s) tab above.

Inverter
Input voltage range 9.5 - 17V
Output (1) Output voltage: 120 VAC ± 2%
Frequency: 60 Hz ± 0.1% (1)
Cont. output power at 25°C (3) 3000 VA
Cont. output power at 25°C 2400 W
Cont. output power at 40°C 2200 W
Cont. output power at 65°C 1700 W
Peak power 6000 W
Maximum efficiency 94%
Zero load power 25W
Zero load power in AES mode 20W
Zero load power in Search mode 12W
Charger
Charge voltage 'absorption' (VDC) 57.6V
Charge voltage 'float' (VDC) 55.2V
Storage mode (VDC) 52.8V
Charge current house battery (A) (4) 35A
Charge current starter battery (A) 4 A (12V and 24V models only)
Battery temperature sensor Yes
Enclosure
Material & Color Steel, blue RAL 5012
Battery-connection (4) M8 bolts ( 2 plus & 2 minus connections)
120/240 VAC-connection Screw terminals 13 mm²
(6 AWG)
Weight 19kg (42 lbs)
Dimension ( H x W x D) 362 x 258 x 218 mm
14.3 x 10.2 x 8.6 inch

Share your knowledge of this product. Be the first to write a review »