Home > Manufacturers >

Battle Born BB10012 100Ah 12VDC Deep Cycle Lithium Iron Phosphate (LiFePO4) Battery

Battle Born BB10012 100Ah 12VDC Deep Cycle Lithium Iron Phosphate (LiFePO4) Battery
 
Alternative Views:


Our Price: $925.00


Product Code: BB10012
Qty:

Description Document(s) Extended Information
 

Battle Born BB10012 100Ah 12VDC Deep Cycle Lithium Iron Phosphate (LiFePO4) Battery

Manufacturer Part#: BB10012

The powerful battery solution to elevate any outdoor adventure. It’s time to upgrade from your traditional lead acid battery! What you need is a new battery that’s lighter, safer, and works with various systems. More importantly, it should be able to keep you company for many of your outdoor adventures! This 100Ah 12VDC LiFePO4 Deep Cycle Battery by Battle Born Batteries delivers superior and long-lasting performance!

Our lithium-ion batteries are designed for long-term use and can last up to 10 times longer than lead-acid batteries, with 3,000-5,000 deep discharge cycles. These LiFePO4 batteries also have an internal Battery Management System (BMS), which protects them from common battery failures like high and low voltage, short circuits, and hot and cold temperatures. Compared to a conventional lead acid battery, our rechargeable Battle Born Batteries are 1/5th the weight for the same amount of usable power, weighing in at just 31 lbs. They, too, provide up to 3x more power in the same physical space and charge 5x faster.

With maximum safety, flexibility, and versatility, these LiFePO4 batteries can be wired in series or parallel and installed in any position, orientation, or space. Battle Born Batteries are made with quality in mind. We source our raw materials from reputable suppliers and assemble lithium batteries using cylindrical cells in our 99,000-square-foot facility in Reno, Nevada.

More details about our LiFePO4 deep cycle batteries:

  • Dimensions: 12.76 × 6.86 × 8.95 in
  • Certified for UL-2054, UL-62133, and UN38.8 compliant
  • Ships with 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts, brass washers, and 18-8 stainless steel nuts with nylon inserts. Invest in a battery and power you can count on
Specifications

Full data sheet can be found in the Document(s) tab above.

Electrical Specification
Voltage 12V
Capacity 100Ah
Operating Temperature - 4°F to 135°F
( - 20°C to 57.2°C )
Efficiency 99 %
Self Discharge 2-3 % per month
Maximum Series Voltage 48V
Cycles 3K - 5K
Built-in BMS Internal
Resistance 7 mΩ
Usable DoD 100 %
Charging Specification
Recommended Charge Current .5c
Max Charge Current 50A
Absorption Voltage 14.2V - 14.6V
Float Voltage 13.4V - 13.8V
Absorption Time 30 Minutes per 100Ah
battery bank
BMS Charge Current
Cut-Off
.5C Recommended
Recharge / Rebulk Voltage 13.3V
BMS Cell Balancing
Voltage Range
14.2V - 14.6V
High BMS Voltage Protection 14.7VDC
Temperature Compensation No/Disable
Recognized Specification
Certifications UN38.3, UL/CSA-62133-2, UL-2054
Shipping Class UN3480, Class 9
Discharging Specification
Max Discharge Current 100A
Peak Discharge Current 200A for 30 Seconds
Surge for Loads over 500A .5 Seconds
Recommended LVD 10.5V
BMS Discharge Voltage Cut-Off 10V
Reconnect Voltage 10V
Short Circuit Protection Yes
Mechanical Specification
Dimensions
(L x W x H)
12.76 x 6.86 x 8.95 inch
Weight 31 lbs
Terminal Type .25-inch Brass
Terminal Hole 3/8-inch hole and 3/8-inch
or 5/16-inch hardware is suggested
Terminal Torque 9-11 Ft-lb
Case Material ABS Fire Rated
Cell Type - Electrolyte LiFeP04
Sealed and Water
Resistant Case
Non-Submersible
Temperature Specification
Discharge Temperature - 4°F to 135°F
( - 20°C to 57.2°C )
Charge Temperature 25°F - 135°F
Storage Temperature - 10°F to 140°F
( - 23°C to 60°C )
BMS High Temperature Cut-Off 135°F
BMS Reconnect Temperature 135°F

Share your knowledge of this product. Be the first to write a review »