WAVE Remote Power Systems can be used for all types of applications such as:
Monitoring, Lighting, Security, Utility, SCADA, Traffic Controls, Emergency Power, Oil & Gas, and many more!
Data Sheet
Solar Module:
- Qty: 2 - 140 Watt – STC (Standard Test Conditions) Crystalline
- 12 Volt - Nominal System Voltage
Mount:
- Dual Side of Pole Mount, 2-Modules
- Adjustable
- Qty: 4 - 4” U-Bolts - Designed to be installed a 4” SCH 40 pole (pole not provided)
Battery Enclosure:
- Mill Finish Aluminum – 30.5”x24”x14.5”
- NEMA 3R Vented
- Holds Two Group 8D or Six Group 30 Batteries
- ¼ Turn Door Latches (1 Lockable)
- Enclosure Mounting Channels for 1” to 12” Pole Clamps
- 2” Pole Clamps
- 20” Wide Component Mounting Channel with Channel Nuts and Screws
- Removable Shelf for Second Battery or Equipment
- Two ½” Conduit Holes at Bottom
Battery:
- Valve-Regulated, 265Ah, 12V, 8G8D
- Rated 1,000 Cycles @ 50% DOD
- 20.44”x10.97”x11.25”
- 157 lbs.
Controller Assembly:
- 20 Amp - 12 Volt w/ LVD (Low Volt Disconnect)
- ETL Listed to UL 1741 and CSA C22.2 No. 107.1-01
- Advanced PWM Charging
- Designed for Harsh Environments (Temp. Rating of -40 C to +60 C)
- Circuit Breakers on Array, Battery, and Load Lines
- Terminal Blocks for Array and Load Connects
- Prewired and Integrated into Enclosure
Output Cable:
- Qty: 2 - 15’ with Male & Female MC4 Connectors
- ½” 2-hole connector
Options (Additional Charges may Apply):
- High Wind Rated Mounting
- Stainless Steel Hardware
- 4”-8” U-bolts
- White Powder Coating
- 48VDC Nominal System Voltage
- Power over Ethernet (PoE)
- Lighting Controls
- Remote Monitoring & Control
- Meters
- 120VAC Output
Calculate Load