Chemlink Adhesive/Sealant > M-1 Structural Adhesive Sealant

$11.31
In stock
SKU
A-CHEMLINK-M1

M-1® Universal Adhesive/Sealant

M-1 adheres to a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams so it is works in almost any situation requiring a sealant. Yet it delivers nearly 400 psi shear strength and remains elastic after cure—up to 525% elongation, so it also performs as a structural adhesive.

  • Commercial Roofing: Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs.
  • Residential Roofing: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction.
  • Lightning protection: Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution
  • Masonry and concrete: Crack repairs, horizontal and vertical expansion joints, bonding metal brackets
  • Mechanical: Sealing ducts, insulation, flanges and piping Sealing termination bars

M-1 Advantages

  • Non-shrinking
  • No solvents – non-toxic – no odor – no risk to human health
  • Applies down to 32°F/0°C
  • Continuous service at 200° F/93°C
  • Effective on damp surfaces
  • Skins over in 30 minutes
  • Paintable
  • Non-slump, applies vertically and overhead
  • Good color stability, UV stable
  • Gun grade, no special tools or mixing required

Application Performance Standards:

  • • ASTM C920, Type S, Grade NS, Class 35
    Uses NT, T1, M, G, A & O
    • ASTM E84, Class A
    • Federal Specification TT-S-00230-C Type II, Class B
    • Corps of Engineers CRD-C-541, Type II, Class B
    • Canadian Standards Board CAN 19, 13-M82

Regulatory Compliance

  • Conforms to OTC Rule for Sealants and Caulks
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65
  • Conforms to USDA Requirements for Non-food Contact

Green Standards:

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)

M1 Sealant used as sealant; 1 part used as filler

Quantity Calculations:

  • Estimated (1) tube 10.1 oz. M1 for (4) 3" E-Curbs
  • Estimated (1) 10.1 oz tube "1 Part" for (2) 3" E-Curbs
  • Estimated (1) 64 oz. pouch "1 Part" for (12) 3" E-Curbs
  • Extra tubes of M1 and 1 Part recommended
  • M1, 1 Part, and E-curb sold separately in individual quantities:

Datasheet:

More Information
Short Description N/A
Write Your Own Review
You're reviewing:Chemlink Adhesive/Sealant > M-1 Structural Adhesive Sealant
You have submitted no questions.
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.
Frequently Bought Together